ADJ expands Vision Series

The Vision Series of LED video panels has a new member. Designed for both inside and outside events, the VS3IP is ADJ’s highest-resolution, IP-rated LED video panel to date. It features a 150x150 matrix of three-in-one SMD1921 LEDs, delivering a pixel pitch of 3.84mm for a pixel density of 67,816 per m². It delivers a maximum brightness of 4,500 NITS with a contrast ratio of 5000:1, making it suitable for use in daylight hours. The VS3IP also offers 0~100% brightness adjustment allowing the output to be reduced when required, for example in smaller indoor applications or to ensure that video content doesn’t overpower lighting fixtures and onstage content when used as a backdrop.

The panel features protection of its front surface from liquid and particles rated to the IP65 standard. The rear panel has an IP54 rating and the unit is fitted with IP65-rated locking sockets for power and data (RJ45). The input and thru connections for both are also fitted with rubber caps to provide added protection during transit and also if a thru socket is not in use for a particular deployment.

A viewing angle of 160° x 140° (HxV) at 3m can be further enhanced using the optional angling feature. It allows the panels to be joined together at either a concave or convex angle of 3° or 6°. This means that curving LED video screens can be constructed to allow better viewing for audience members positioned to the side of a stage or to fit with the contours of a curved stage set or venue design.

Weighing 9kg, the panel is fitted with retractable corner protectors that fold out from the back of the unit to keep the corners safe from knocks during transportation, setup and teardown. The low-profile panel measures 576mm x 576mm x 76.8mm (HxWxD) and can run on any voltage between 100V and 240V (50–60Hz), making it suitable for international touring duties. It has a maximum power consumption of 210W per panel and an average operating power consumption of 84W per panel.