Logical Sectre

Logic System has added the Sectre series to its growing family of loudspeaker solutions, a high-output, constant-curvature 2-way loudspeaker, where high SPL up to 30m distance is required, The CC1530 features a 15-inch neodymium driver with a 3.5-inch voice coil, vented gap and demodulation ring. An array of four wide-bandwidth 1-inch compression drivers, loaded by a large HF horn and waveguide assembly, provides 100° x 30° and 100° x 10 pattern control down to below the 1.2kHz crossover point. The combination enables both models to deliver high output levels, while maintaining a clear, low-distortion tonal balance. The LF driver is loaded by a phase bung, which boosts output at the upper end of the LF operating band.

An integral 2-point flying system allows arrays of up to six Sectre loudspeakers to be built, with a one- or two-point suspension flying bar available for the deployment of vertical arrays. Using a combination of CC1510 and CC1530 models, arrays can be built to match the coverage and SPL requirements of the venue. Up to three CC1530 can be deployed horizontally, using the H3 plate accessory.

Constructed in 18mm Baltic birch ply cabinets and finished in a grey polyurea coating, the cabinets can be rotated to deploy HF horn left and right for vertical arrays or top and bottom for horizontal arrays. Up to eight Sectre loudspeakers can be driven by one LS series amplifier, which also comes pre-loaded with DSP EQ presets and limiter settings for Sectre arrays.